KVH Industries TracPhone FB250 User Manual page 134

Using the network classification table
Overview
The network classification table is used for making an association between
network devices and network user groups.
Each entry in the table shows MAC address, IP address, LAN port and network
user group.
When a network device is connected, the terminal runs through the network
classification table to check if the new connection matches any of the entries
in the table. When a match is found, the terminal establishes a PDP context
and the device is ready for use with the terminal.
Adding or editing an entry in the network classification table
To add a new entry to the table or to edit an existing entry, do as follows:
1. Select SETTINGS > Network classification table.
Chapter 4: Using the web interface
Managing LAN network users 121