KVH Industries TracPhone FB250 User Manual page 190

ID Event Text
Failed to
08031
enter normal
operation
Firmware image
08032
version lower
than active
antenna
version
Firmware image
08033
doesn't
support
antenna
hardware
Antenna failed
08034
to exit Flash
Manager. Power
cycle needed
Unable to open
08035
port for HPA
burst
monitoring
Chapter 5: Troubleshooting
Explanation
Antenna failed to
start up normally.
The firmware in the
antenna is newer
than expected by
the terminal.
The antenna
hardware version is
not supported by
the terminal.
New firmware was
successfully
uploaded to the
antenna but the
antenna failed to
start normally with
the new firmware.
There was an error
communicating with
the antenna.
Status signaling
Remedy
Reboot the
terminal.
Contact your
distributor if the
problem persists.
Update the terminal
software.
Contact your
distributor.
Reboot the
terminal. Contact
your distributor if
the problem
persists.
Reboot the
terminal. Contact
your distributor if
the problem
persists.
177