KVH Industries TracPhone FB250 User Manual page 49

Chapter 3: Operating the system
The IP handset
When you connect the IP handset to one of the LAN (PoE) connectors on the
terminal you can use the handset display and keypad to enter the PIN or to
view the status of the terminal.
The IP handset includes the following items for the terminal:
• Viewing C/No (signal strength) and status ("Ready", "Registering" etc.) for
the TracPhone system.
• Viewing the IP address and software version of the terminal.
• Viewing the IP handset settings from the terminal.
• Entering the PIN and PUK for the terminal.
• Inclusion of the terminal phone book (not editable) in the IP handset
Contacts.
For further information on the IP handset, see the user manual for the IP
handset.
The web interface of the terminal
The web interface is a built-in web server for setting up and controlling the
terminal, using a connected computer with a browser. No installation of
software is required.
With the web interface you can access the same settings as with the IP
handset, and additionally:
• edit the phone book
• view information on calls to/from the terminal
• view properties of the terminal and antenna
• set up the interfaces of the terminal
• upload software
• set up user rights (requires Administrator password)
• set up network user groups (requires Administrator password)
For information on how to use the web interface, see Using the web interface
on page 57.
36 General