BLADEZ Elliptical X-350p Owner's Manual page 16

ASSEMBLY INSTRUCTIONS (cont'd)
STEP #9.
43
PLEASE TAKE CARE NOT TO PINCH OR CUT
THE CONTROL WIRING.
30
Join the male and female ends of the connectors
that attach the console control wire to the Upper
portion of the center tube. Before attaching the
console to the mounting plate of the center tube
remove the screws on the console and use them
to secure the console in place as shown in
figure #9.
Illustration #9
STEP #10.
Mount the Bottle Holder (90) using the Mounting
Bracket (89) and Screws (92&93) provide as
shown in Illustration #10.
90
93
89
92
Illustration #10
14