Download
Share
Print this page
BLADEZ BF-7.0E Owner's Manual
  1. Manuals
  2. Brands
  3. BLADEZ Manuals
  4. Elliptical Trainer
  5. BF-7.0E
  6. Owner's manual

BLADEZ BF-7.0E Owner's Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
ELLIPTICAL BF-7.0E
OWNER'S MANUAL
BLADEZ Corporation
20155 Ellipse
Foothill Ranch, CA 92610
Phone: 949-206-0330
Fax: 949-206-0350
Email:
c ustomerservice@ebladez.com
H
Revised: 1/16/06

Advertisement

loading
Need help?

Need help?

Do you have a question about the BF-7.0E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BLADEZ BF-7.0E

Summary of Contents for BLADEZ BF-7.0E

  • Page 1 ELLIPTICAL BF-7.0E OWNER’S MANUAL BLADEZ Corporation 20155 Ellipse Foothill Ranch, CA 92610 Phone: 949-206-0330 Fax: 949-206-0350 Email: c ustomerservice@ebladez.com Revised: 1/16/06...
  • Page 2 BF-7.0E is designed to make your workouts more effective and enjoyable. Please read this manual carefully before using the BF-7.0E. This will allow you to get a full understanding of all the features the Bladez Elliptical provides. If you have questions or concerns, please contact BLADEZ Corporation or any authorized BLADEZ FITNESS distributors in your area.

  • Page 3: Table Of Contents

    BF-7.0E TABLE OF CONTENTS SECTION PAGE 1. IMPORTANT SAFETY INSTRUCTIONS ............3 2. ASSEMBLY INSTRUCTIONS ............... 5 3. COMPUTER CONSOLE ................23 4. COMPUTER CONSOLE DESCRIPTIONS...........24 5. INITIAL SETUP ....................25 6. WORKOUT OPTIONS..................26 7. SLEEP MODE ....................27 8. WARRANTY....................28...

  • Page 4: Important Safety Instructions

    BF-7.0E SECTION 1 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using the elliptical. Notice: Before using this or any other exercise equipment consult your family physician or health care professional to develop a well planned exercise program to fit your health needs.
  • Page 5 If the display begins to dim or becomes difficult to see, replace the batteries. If you do not plan to use the BF-7.0E for an extended period, remove the batteries to prevent leakage.

  • Page 6: Assembly Instructions

    BF-7.0E SECTION 2 - ASSEMBLY INSTRUCTIONS...
  • Page 7 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED...
  • Page 8 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED...
  • Page 9 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED...
  • Page 10 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED...
  • Page 11 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED For safety, it is recommended that a minimum of two people assemble this elliptical trainer. NOTE: Please refer to pages 6-8 to see illustrations of the parts used for each step of the assembly process. The step numbers printed on the parts blister packs correspond with the assembly steps in this manual.
  • Page 12 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 2. Assembly of frame and running leg set. 1.1 Align the holes in the steel plate of the running legs with the holes at the rear of the frame and attach using M10 lock washers and M10 bolts as shown.
  • Page 13 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 3. Assembly of center shroud and running leg set. 1.1 Align the hole in the center shroud with the hole in the center of the running leg set and attach with M5 bolt.
  • Page 14 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 4. Assembly of deck set and frame. 1.1 Slide 18.7x26x0.3T wave washer onto the left crankshaft of the frame. Slide the left deck set steel tube onto the crankshaft on the left side of the frame followed by the 8x25x2.0t flat washer and fasten with M8 bolt.
  • Page 15 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED NOTE: Before continuing to Step 5, attach the resistance tension cable as shown in the illustrations below.
  • Page 16 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 5. Assembly of mast and frame. 1.1 First place the mast into the mast boot, then place the mast into the frame steel tube. Fasten the steel tube with M8 bolts on the side of the steel tube and M8 bolt and curved washer in the front.
  • Page 17 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 6. Assembly of lower handrails, mast and deck set. 1.1 Slide a plastic spacer and a wave washer onto the left horizontal bar. Connect the upper part of the left handrail with the horizontal bar on the mast. Fasten with M8 washer and bolt.
  • Page 18 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 7. Assembly of upper handrail to lower handrail. 1.1 Fit the upper left handrail into lower left handrail; fasten it with M8 nuts and bolts. 1.2 Fit the upper right handrail into lower right handrail; fasten it with M8 nuts and bolts.
  • Page 19 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 8. Assembly of handrail shrouds. 1.1 Place the front left shroud and the rear left shroud on the horizontal bar and fasten them with M4 bolts. 1.2 Place the front right shroud and the rear right shroud on the horizontal bar and fasten...
  • Page 20 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 9. Assembly of handrail and deck set plastic covers. 1.1 Place the plastic cover on the front of the left deck set, make sure the bolt hole on the plastic and the bolt hole on the steel tube are aligned, then fasten the plastic cover with M4 bolts.
  • Page 21 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 10. Assembly of foot pedals to deck set base plate. Make sure the bolt holes on the left foot pedal and left base plate are aligned and fasten them with flat washers and M5 bolts.
  • Page 22 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 11. Assembly of console. Fasten the console to the top of the mast with the bolts in the back of the console using M6 acorn nuts and flat washers. Connect the cables. Install 4 AA alkaline batteries.
  • Page 23 BF-7.0E ASSEMBLY INSTRUCTIONS CONTINUED STEP 12. Assembly of bottle holder. Place the bottle holder on the mast and fasten with M4 bolts.

  • Page 24: Computer Console

    BF-7.0E SECTION 3 - COMPUTER CONSOLE...

  • Page 25: Computer Console Descriptions

    BF-7.0E SECTION 4 - COMPUTER CONSOLE DESCRIPTIONS NOTE: There is no ON/OFF button. You will hear a confirmation “Beep” when you press any key. A. UP - Press the UP button to change the current value such as time, distance, calories etc.

  • Page 26: Initial Setup

    BF-7.0E SECTION 5 – INITIAL SETUP BATTERY INSTALLATION If you haven’t already done so, remove the cover from the back of the computer console and install 4 AA alkaline batteries. You will hear a beep and all segments of the LCD will light up for 2-3 seconds.

  • Page 27: Workout Options

    BF-7.0E SECTION 6 - WORKOUT OPTIONS After the initial time and date is set, you will see the following display. 0:00 0.00 RPM SPEED TIME DISTANCE CALORIES WORKOUT TIME SETTING 1. At the TIME position 0:00 will be flashing. 2. Press the UP button to set the workout time in 1 minute increments. When you begin your workout, the time will count DOWN to 0.

  • Page 28: Sleep Mode

    BF-7.0E SETTING THE TENSION LEVEL Set the tension level (resistance) of your workout by turning the tension knob on the mast below the computer console. There are 8 levels from 1 (the lowest level) to 8. You can now begin your workout.

  • Page 29: Warranty

    LABOR – 1 Year Bladez Fitness shall cover the labor cost for the repair of the device for a period of one year from the date of original purchase, as long as the device remains in the possession of the original owner.