Table of Contents
Advertisement
6. Heart rate not displayed
7. Operation stops
automatically and E1 is
displayed.
8. The treadmill operates
normally with no load but
halts midway.
9. The display fails to work
normally or cannot display at
all, and the keys don't work.
Power Problems
1. Check fuses (They are located on the controller under the motor cover next to the
on/off switch.)
2. Check power outlet (Plug something else into the power outlet to ensure that the
power outlet is working correctly).
3. Check Power Cable (You may need to take it to an electrician).
PLEASE NOTE: Before beginning any exercise program, consult you physician.
This is important especially if you are over the age of 35 or individuals with pre-
existing health problems.
The pulse sensors are not medical devices. Various factors, including the user's
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as an exercise aid in determining heart rate trends in general.
Exercising is a great way to control your weight, improve your fitness and reduce the effect
of aging and stress. The key to success is to make exercise a regular and enjoyable part of
your everyday life.
1. Transmitter is not making
good contact with skin.
2. Electromagnetic
interference.
The self-maintenance
function of system works
suddenly.
The strap becomes loose.
The electronic meter is
influenced by an external
factor.
6 EXERCISE GUIDE
LIFESPAN EQUALIZER XL
1. Moisten skin contact area on the
transmitter strap, or turn
transmitter strap upside down.
2. Turn off any television,
microwave, or computer within 6
feet of treadmill.
1．Restart the treadmill after
pressing 'STOP'.
2．Restart the treadmill after the
power supply has been
disconnected for 5min.
3．Replace the sensor.
Adjust the strap following the
specification.
Disconnect the power supply and
switch off switches, and restart the
treadmill 5min later.
Page 19
Advertisement
Table of Contents
