Plug The Power Cord In And Turn The Treadmill On; Install Safety Key; Set Date And Time - LifeSpan TR3000i Owner's Manual

Step 8: Cut red tie strap and roll out of box
See Moving and Storage on page 32
Step 9: Plug the power cord in and turn the treadmill on
red tie strap
Step 8
Step 10: Install safety key
Step 11: Set date and time
To set the date and time of day on your console
follow these steps:
1. Remove the safety key and re-install
2. Press any of the quick speed buttons for 3
seconds to initiate the date and time set up
mode.
3. Press the UP / DOWN buttons to set the correct
YEAR, Press Enter
4. Press the UP / DOWN buttons to select the
correct MONTH, Press Enter
5. Press the UP / DOWN buttons to select the
correct DAY, Press Enter
6. Press the UP / DOWN buttons to set the HOUR,
Press Enter
7. Press the UP / DOWN buttons to set the
MINUTES, Press Enter
14
power receptacle
Step 9
safety key
3.0 4.0 5.0 6.0
MPH MPH MPH MPH