Table of Contents
Advertisement
2.3 ASSEMBLY INSTRUCTIONS
Main frame and Support connection: Fix the Left support and Right support onto the
1．
Main frame tightly with inner hexagonal pan-headed bolt (7) and the spring washer (8).
2. Put the Degree adjustable pin (55) into the Knighthead (54),then pull the Main
frame ,let the pin into the hole , screw the pin tightly.
3．Use the Inner hexagonal wrench (S6) to fix the pedals (II)、bolts (76) and flat washer
(8) on both sides of the Main frame
LIFESPAN EQUALIZER XL
Page 9
Advertisement
Table of Contents
