Credit Pre-Authorization; Initial Credit Pre-Authorization - Ingenico I7910 User Manual

I7910 Payment – User Manual

Credit Pre-authorization

Initial Credit Pre-authorization

1.
SALE
PRE-AUTH
PRE-AUTH COMP
2.
3.
4.
PRESS OK FOR 1ST
5.
PRE-AUTH OR KEY
PRE-AUTH REF #
PRE-AUTH
6.
SWIPE CARD
PRE-AUTH
7.
AMOUNT
8.
$10.00
TRANS APPROVED
9.
1234567
$10.00
REF# 9876543
10. Press [OK] after detaching the receipt.
PRINT
NEXT COPY – OK?
54
At the idle screen, swipe the credit card if the default transaction is pre-authorization
(see pages 23 and 35), otherwise use [
See also Credit Pre-authorizations and Pre-authorization Completions (page 36).
Enter the password (configurable; see page 25).
Perform the credit card security (swiped cards, configurable; see page 37).
Enter the clerk ID – 123 in the example (configurable; see page 22).
Press [OK] leaving this prompt blank.
If you have not done it before, swipe the card or enter the number manually (see page
37) and perform the credit card security (swiped cards, configurable; see page 37).
Enter the transaction amount ($10.00 in the example).
The terminal communicates with the host and displays SENDING, RECEIVING and
PROCESSING.
The terminal displays the response (see page 38) and prints the receipt (see below).
The terminal displays PRINTING while it prints the next copies.
Detach them and press [OK].
The terminal returns to the idle screen.
] to highlight PRE-AUTH, then press [OK].
0120-07390-0101