Ingenico I7910 User Manual page 19

I7910 Payment – User Manual
14. Enter the port number (34567 in the example).
BACKUP PORT NO
34567
15. Select [OTHER].
CONFIG - SELECT
COMM OTHER
TIP ENTRY
16. Select [YES] if your business environment requires tip entry or [NO] otherwise. The
NO
YES NO
CASHBACK
17. Select the cashback option:
NO
YES NO
The terminal displays the current value – NO.
18. Enter the maximum cashback amount ($20.00 in the example). Entering a zero limit is
CASHBACK LIMIT
$20.00
CLERK ID
19. Select [YES] if your business environment requires keeping track of financial
NO
YES NO
20. Enter the number of minutes (from 1 to 99) after which the terminal powers off when left
POWER-OFF TIME
2
A s h o r t e r p o w e r - o f f t
A s h o r t e r p o w e r - o f f
CREDIT CRD CHECK
21. Use [
ECHO CARD #
LAST 4 DIGITS
NO CHECK
TAKE IMPRINT
22. Select [YES] to display the "take imprint" warning message during manually entered
YES
YES NO
TERMINAL DATE
23. Enter the current date (to set the internal clock) – 20020219 in the example.
(YYYYMMDD)
20020219
TERMINAL TIME
24. Enter the current time (1345 in the example). The time is entered in a 24-hour format.
(HHMM)
1345
22
terminal displays the current value – NO.
[YES] – if your business environment allows for cashback as part of debit sale
transactions (next step 18;
[NO] – for "no cashback" (next step: 19).
the same as selecting [NO] at step 17.
transactions by staff member (or clerk ID). The clerk ID is entered at each financial
transactions and is printed on receipts and certain reports.
Select [NO] not to control transactions by clerk ID.
unattended (2 minutes in the example).
i m e s a v e s b a t t e r y .
t i m e s a v e s b a t t e r y .
] and [ ] to highlight the desired type of credit card security and press [OK].
The credit card security check is used to verify the card number when a credit card is
swiped for sale, forced post and pre-authorization transactions. The options are:
ECHO CARD # – the credit card number is displayed after the card swipe. You
compare the number read by the terminal with the number embossed on the card;
LAST 4 DIGITS – you enter the last 4 digits embossed on the card. The terminal
compares it with the number read from the card. The error message DIGITS DO
NOT MATCH is displayed if they are not the same;
NO CHECK – no security check is performed.
See also Security Check on Swiped Credit Cards (page 37).
credit sales, forced posts and pre-authorizations. Select [NO] if the message is not to
be displayed. The terminal displays the current value – YES. See also Manual Entry of
Credit Cards (page 37).
0120-07390-0101