Define the automatic original feed setting
Introduction
This setting provides an easy method to feed a set of originals, because you only
need to press the start key once. If you use this setting you can also define the original
feed time-out.
Before you begin
Open the Océ Settings Editor and log on as Key Operator. Take the following steps
to log on.
Click 'File' and select 'Log on'.
1.
Select 'Key Operator' and enter the password.
2.
How to define the auto original feed settings
Click 'View' and select 'Key Operator settings'.
1.
Navigate to Key Operator - Scanner - Auto original feed time-out.
2.
Select 'On'.
3.
Define the original feed time-out if necessary.
4.
Click 'Apply' to confirm the settings.
5.
Click 'File' and select 'Log off' to prevent unauthorized use.
6.
Note: You can also define the auto original feed setting at the scanner operator
panel. Select 'System' - 'Auto feed' - 'On'.
Result
Feed a set of originals in a more productive way.
Define the automatic original feed setting
83