Start The Océ Power Logic® Controller Applications - Oce TCS500 User Manual

Start the Océ Power Logic® controller applications
Introduction
You can start the Océ Power Logic® controller applications locally on the controller
or from a remote workstation. This section describes how to start the applications
locally on the Océ Power Logic® controller. The section 'Start the applications with
Océ Remote Logic®' describes how to start the applications from a remote
workstation
Start the applications locally on the Océ Power Logic® Controller
Select the 'Launcher' application.
1.
Select the required application.
2.
The application starts with your default system.
Start the Océ Power Logic® controller applications
(see 'Start the applications with Océ Remote Logic®' on page 117).
73