Introduction To Scan-To-File Jobs - Oce TCS500 User Manual

Introduction to scan-to-file jobs

Introduction to scan-to-file jobs
Introduction
A basic scan-to-file job takes three steps. Feed the original, select 'Scan-to-file' and
press the start key. Every other type of scan-to-file job, where you change the
scan-to-file settings, is called an extended scan-to-file job. An extended scan-to-file
job takes one additional step. Define the scan-to-file job settings at the scanner
operator panel. When you select 'Scan-to-file', the scanner operator panel shows five
scan-to-file job templates. The scan-to-file job templates provide access to the
different settings per scan-to-file job template. When you select a scan-to-file job
template, the scanner operator panel shows the top 5 settings of the selected
scan-to-file job template. The top 5 settings are the most often used settings. You can
define the top 5 settings and their values for each scan-to-file job template with the
Océ Settings Editor.
on page 82). You can use the scroll wheel to see the other settings. After you start a
scan-to-file job, you can manage your jobs from the Océ Queue Manager.
Illustration
[96]
[96] The scan-to-file job templates
126 Chapter 5 Use the Océ TCS500 for scan-to-file jobs
(see 'Define the job templates for your scanner operator panel'