Clean The Scan Area - Oce TCS500 User Manual

Note: When the calibration process stops or fails, follow the instructions on the
scanner operator panel carefully.
Result
The Océ TCS500 scanner is calibrated and the scan quality is correct again.

Clean the scan area

Introduction
You need to keep the glass plate clean. A dirty glass plate causes a decreased copy
and scan quality. Clean the glass plate when you have lines on the image that are not
on the original.
Required tools
Océ cleaner A, part of cleaning kit with codenumber 1068117
Two lint-free cloths
Attention: Use Océ cleaner A to get the best results.
Attention: Make sure you do not damage the sensor at the right of the glass
plate.
Clean the scan area
239