Oce TCS500 User Manual page 45

How to adjust for productive print jobs with humid prints
Attention: The copy receiving rack can collect a maximum of 100 prints in this
position.
Place the rack with side II against the back of the printer.
1.
Secure the rack with the breaks of the wheels.
2.
Place the trailing edge stoppers at the tray.
3.
Adjust the rack with the guides into the position marked with one of the following
4.
figures.
[32]
[32] Rack adjustment for standard print jobs with humid prints
[33]
[33] Rack adjustment for standard print jobs with very humid prints
Use the handles on the left and right guide to lower the tray.
Take the end of the tray to lift the tray.
Note: The mark for very humid prints is at the bottom of the adjust guides. Lift and
turn the guides to adjust the rack into the position for very humid prints.
The optional copy receiving rack
45