Oce ColorWave 300 User Manual page 74

Scan to a USB mass storage device
Note:
With a scan template you can pre-define the settings you need for a scan job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see
scan templates' on page
'Insert USB device'.
5.
Press the start button.
6.
After the scan procedure the scanner always holds the original. You can release the original
if you select 'Release paper' on the user panel.
Result
The system creates a sub-directory "scans_x" on the USB mass storage device and stores
the scanned file in this sub-directory in JPEG format.
74 Chapter 3 - Quick start
133).
'Define the scan job preferences and