Oce ColorWave 300 User Manual page 163

If you want to change the pre-defined settings of the selected scan template, use the
confirmation button to open the scan template and display an overview of the pre-defined
settings groups.
Scroll to the settings group you want to change.
5.
Open the settings group you want to change with the confirmation button and scroll
6.
to the setting you want to change.
Open this setting, scroll through the settings values and select the correct value with
the confirmation button.
Change the other settings in the settings group if necessary.
Select 'OK' to return to the overview of the predefined settings groups.
Repeat steps 5 and 6 until you have set all the correct values for your scan job.
7.
Press the start button.
8.
Chapter 5 - Use the Océ ColorWave 300 multifunction printer
Do an extended scan job
163