Oce ColorWave 300 User Manual page 223

Use the scroll wheel to go to the 'Scanner calibration'('Calibrate the scanner') wizard.
3.
Open this section with the confirmation button.
4.
Insert the scanner calibration sheet¹ as instructed in the wizard.
5.
Press the start button to start the scanner calibration.
6.
The message 'Calibrating, please wait... do not open the scanner.' appears.
Note:
'Calibrating the scanner takes between 5 to 10 minutes.'
Note:
¹ The scanner calibration sheet code number is 97002634.
Chapter 6 - Ensure the best output quality
Calibrate the scanner
223