Oce ColorWave 300 User Manual page 299

#
Error Description
code
4501 - Excessive leakage current detect-
4509 ed for head [1...9]
Printhead failing
Replace printed [1...9]
4551 - Head defective during printing
4559
4571 - Head too hot during printing
4579
4581 - Head [1....9] keeps heating
4589
4951 - WOM memory failure for head
4959 [ 1......9]
4961 - Heating of head [1......9] failed
4969
Customer action
Replace the printhead by using the
wizard.
Note:
Never re-insert a printhead
that has caused this problem.
Printhead is probably not placed
correctly. Remove and re-insert the
printhead at the original position.
Note:
If the problem persists you
must replace the printhead.
You can ignore this problem by
pushing the 'OK' button.
Note:
If the problem re-occurs after
a short time you must re-
place the printhead.
Replace the printhead by using the
wizard.
Service warning only. No customer
intervention needed.
Continue printing until the message
'Replace printhead' displays on the
user panel.
Then replace the printhead by using
the wizard.
Chapter 8 - System messages and solutions
Overview
299