Oce ColorWave 300 User Manual page 264

Optimize the output quality on the printer
Problem
White stripes in
filled areas
The output color is
not the same as the
original color
The length and
width measure-
ments are different
from the original
The colored lines
are not well aligned
or blurred
264 Chapter 6 - Ensure the best output quality
Method of analy-
sis
'Quality check'
print
'Quality check'
print
'Quality check'
print
'Quality check'
print
Solutions
Use the 'Presentation' quality
mode'Output type, output quality and
print speed' on page 225
Use the 'Optimize print quality' wiz-
ard to correct the problem
'Print quality' wizard' on page
Make sure you define the correct soft-
ware settings, for example the correct
pen settings.
Use the 'Presentation' quality mode
Make sure you defined the correct
scale settings
Use the 'Presentation' quality mode
Use the 'Optimize print quality' wiz-
ard to correct the problem.
In case of a media length deviation,
adjust the 'Cut length correction' in
the Océ Express WebTools.
In case of an image length deviation,
set the 'Vertical print optimization' to
'Size accuracy' and adjust the image
length correction in the Océ Express
WebTools.
Use the 'Presentation' quality mode
Use the 'Optimize print quality' wiz-
ard to correct the problem.
When failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing printheads
'Replace a defective printhead' on page
280.
'Use the
267.