Oce ColorWave 300 User Manual page 268

Use the 'Print quality' wizard
Only start the wizard when you are sure that you used the correct media type and the
correct print mode, and the output quality is still not satisfactory.
How to use the 'Print quality' wizard
From the'HOME' screen select the 'System' tab.
1.
Select the 'Setup' tab.
2.
Use the scroll wheel to go to the 'Print quality'('Optimize print quality') wizard.
3.
Open this section with the confirmation button.
4.
Press the 'Next >' softkey to enter the wizard.
5.
The screen displays the message 'Select roll to use'.
You can only calibrate on the defined media types. When calibration is not possible with
the loaded media, the system asks you to load the correct media. When calibration is
268 Chapter 6 - Ensure the best output quality