Oce ColorWave 300 User Manual page 265

Problem
Missing sections in
lines or stepped
lines
Missing parts of
characters
Ink saturation
causes the media to
cockle
The individual ink
drops merge on the
media
Problems with the
nozzles cause drop-
out
Method of analy-
sis
'Quality check'
print
'Quality check'
print
'Demo print'
'Demo print'
'Demo print'
Chapter 6 - Ensure the best output quality
Optimize the output quality on the printer
Solutions
Use the 'Presentation' quality mode
Use the 'Optimize print quality' wiz-
ard to correct the problem.
When failing printheads cause this
problem, use the 'Replace printhead'
wizard to replace the failing print-
heads.
Use the 'Presentation' quality mode
Use the 'Optimize print quality' wiz-
ard to correct the problem.
The media type defined on the printer
must be the same as the media avail-
able on the printer. When the media
type defined on the printer is not the
same as the media available on the
printer, use the 'Change media type'
wizard to change the media type
Use coated media.
Use the default drying time.
Remove the printer from areas of high
humidity.
Coalescence occurs in the 'Check' mode
when you print on high gloss photopaper.
Use the 'Release' or 'Presentation' quality
mode
Use the 'Optimize print quality' wiz-
ard to correct the problem.
A defective or end-of-life maintenance
cassette can cause this problem. Use
the 'Replace cassette' wizard to replace
the maintenance cassette
maintenance cassette' on page 286
'Replace the
265