Oce ColorWave 300 User Manual page 206

Make a copy and erase a specific area of an original
#
The 'Hor offset'
Open a template with the confirmation button.
Scroll to 'Erase area' and open this setting with the confirmation button.
Scroll to 'Hor offset', define the value with the scroll wheel or numeric keys and con-
firm.
Scroll to 'Vert offset', define the value with the scroll wheel or numeric keys and
confirm.
Scroll to 'Width', define the value with the scroll wheel or numeric keys and confirm.
Scroll to 'Length', define the value with the scroll wheel or numeric keys and confirm.
Press 'OK'
Define the number of copies and press the start button.
4.
Result
The Océ ColorWave 300 copies an original without the specified area.
206 Chapter 5 - Use the Océ ColorWave 300 multifunction printer
The 'Vert offset' The 'Width' The 'Length'