Riding Your Scooter - KYMCO Aglity 50 Owner's Manual

OPERATION

Riding your scooter

NOTE: After starting, allow the engine oil to circulate be-
fore riding your scooter. Allow sufficient idling time after
warm or cold engine start-up before applying load or rev-
ving the engine. This allows time for the lubricating oil to
reach all the critical engine components.
NOTE: Review the scooter safety recommendations on
pages 2 through 6 before you ride.
You and your passenger should always wear appropriate
safety apparel such as a helmet, eye protection, gloves
and other protective clothing each time you ride the scooter.
Never wear any items that will adversely affect your safety.
Make sure flammable materials such as dry grass or
leaves do not come into contact with the exhaust sys-
tem when riding, idling, or parking your scooter.
1. Make sure the throttle is closed and the rear brake is en-
gaged before moving the scooter off the main stand.
2. Mount the scooter from the left side and sit in an upright
position on the seat. Place both hands on the handlebars
and touch the ground with your left foot 1 for stability.
28
3. Release the rear brake and slowly rotate the throttle grip
so that the engine power will be transmitted smoothly to
the rear wheel.
Use the scooter's turn signals to signal your intention to
merge into traffic. Always scan around you and check the
rear view mirrors so you are aware of other traffic. Use
caution as you merge into traffic, keeping to the right until
you match the pace of the traffic.
1 1 1 1 1