Steering & Handlebar Inspection; Instrument Inspection - KYMCO Aglity 50 Owner's Manual

OPERATION
PRI - Steering & handlebar inspection
Before riding, inspect your scooter's handlebars for damage,
and make sure the steering's side-to-side and up-and-down
movement is smooth.
1. Visually inspect the handlebars for any damage.
2. Apply the front brake (right lever) and press down and re-
lease pressure on the handlebar, listening for any abnormal
noise.
3. As you press down and release, also feel for any looseness
from the chassis transmitted to the handlebar.
4. Turn the handlebar from the center fully to the left and then
fully to the right, feeling for any loose components and lis-
tening for any abnormal sounds.
If you detect any looseness or abnormal sounds dur-
ing your steering inspection, do not ride your scooter.
Consult your KYMCO dealer for chassis service.
PRI - Instrument inspection
Before your ride, and as you begin your ride, make sure the
instruments are functioning.
1 1 1 1 1
1. Do the indicator lights 1 (turn signal, for example) function?
2. Does the speedometer 2 needle move as the scooter moves?
3. Does the fuel level gauge needle 3 indicate the fuel level?
NOTE: Contact your KYMCO dealer for repair of your
scooter's instruments if they are not functioning properly.
2 2 2 2 2
3 3 3 3 3
23