Helmet Posts; Main Stand - KYMCO Aglity 50 Owner's Manual

CONTROLS & FEATURES

Helmet posts

Your scooter has two helmet posts AK so you can secure your
helmet(s) outside of the under-seat storage compartment.
AK AK AK AK AK
With the seat up, put the helmet's retaining ring onto the helmet
post. Lower and press down on the seat to lock it and secure the
helmet in place. To remove the helmet, open the seat.
Do not ride your scooter with a helmet hanging from a
helmet post, as this can interfere with your ability to con-
trol your scooter, and may cause an accident.
The under-seat storage compartment may become warm
from engine heat. Therefore, do not store any items in
this compartment that are susceptible to heat damage,
such as food or flammable materials.

Main stand

Your Agility scooter is equipped with a main (center) stand.
AK AK AK AK AK
To park your scooter on the main stand, stand on the left side
of the scooter and grasp the handlebar with your left hand,
while grasping the side of the rear rack with your right hand.
Step down on the foot pad of the main stand with your foot
while pulling up and back on the rear rack. This lifting motion
will allow the scooter to rock backwards and up onto the main
stand.
Always park your the scooter on firm, level ground to
help prevent it from falling over. If you must park on an
incline, aim the front of your scooter uphill.
(center stand)
13