Instruments; Digital Clock - KYMCO Aglity 50 Owner's Manual

CONTROLS & FEATURES

Instruments

4 4 4 4 4
3 3 3 3 3
2 2 2 2 2
1 1 1 1 1
1 1 1 1 1 Odometer: Indicates the total riding mileage of the scooter.
2 2 2 2 2 High Beam Indicator Light: This light is illuminated when
the headlight high beam is on.
3 3 3 3 3 Clock: Indicates the time (24-hour format).
4 4 4 4 4 Turn Signal Indicator Light: Flashes when either turn
signal is being used.
5 5 5 5 5 Speedometer: Indicates the road speed in MPH (miles
per our) and K/PH (kilometers per hour).
6 6 6 6 6 Fuel Gauge: This gauge indicates the amount of gasoline
in the fuel tank. Refill the tank with unleaded gasoline be-
fore the needle reaches the "E" (empty) mark. (Best prac-
tice is to maintain the fuel level no lower than the one-
quarter mark above empty whenever possible).
14

Digital clock

5 5 5 5 5
6 6 6 6 6
Your Agility scooter is equipped with a digital clock 7. To set the
clock, follow this procedure:
1. Press and hold the SETTING BUTTON 8 until the clock's
hour display begins to flash.
2. Press the ADJUST BUTTON 9 to change the clock's hour
to the desired setting.
3. Press the SETTING BUTTON again so that the clock's
minute display is flashing.
4. Press the ADJUST BUTTON to adjust the minute setting.
5. Once the desired time is set, press the SETTING BUTTON
once again to finalize your adjustments to the clock's set-
tings and to release the clock from the adjustment mode.
8 8 8 8 8
7 7 7 7 7
9 9 9 9 9