KYMCO Aglity 50 Owner's Manual page 12

CONTROLS & FEATURES
3 3 3 3 3
3 3 3 3 3 LOCK: In this position, the steering is locked, electrical
power is disconnected and the engine cannot start or oper-
ate (the key can be removed).
Locking the steering
Turn the handlebar fully to the left. Press in and rotate the
ignition switch key counterclockwise to the "LOCK" position.
The steering will now be locked. Remove the ignition switch
key.
After locking the ignition switch, turn the handlebar gen-
tly to confirm that the steering is locked. Do not park
your scooter in a position that will interfere with vehicle
or pedestrian traffic.
10
Do not turn the ignition switch to the lock position when
riding, as this could cause the steering to lock and you
could lose control of your scooter.
Unlocking the steering
Insert and rotate the ignition switch key clockwise from the
"LOCK" position to the "OFF" or "ON" position. The steering is
now unlocked, and you may start and operate the scooter.