Riding Your Scooter - KYMCO Sento 50 Owner's Manual

OPERATION

Riding your scooter

NOTE: After starting, allow the engine oil to circulate be-
fore riding your scooter. Allow sufficient idling time after
warm or cold engine start-up before applying load or rev-
ving the engine. This allows time for the lubricating oil to
reach all the critical engine components.
NOTE: Review the scooter safety recommendations on
pages x and x before you ride.
You and your passenger should always wear appropriate
safety apparel such as a helmet, eye protection, gloves
and other clothes each time you ride the scooter. Never
wear any items that will adversely affect your safety.
Make sure flammable materials such as dry grass or
leaves do not come in contact with the exhaust system
when riding, idling, or parking your scooter.
1. Make sure the throttle is closed and the rear brake brake is
engaged before moving the scooter off the main stand.
28
2. Mount the scooter from the left side and sit on the seat
upright. Place both hands on the handlebars and touch the
ground with your left foot for stablity.
3. Release the rear brake and slowly rotate the throttle grip so
the engine power will be transmitted to the rear wheel
smoothly.