Air Filter Maintenance - KYMCO Aglity 50 Owner's Manual

MAINTENANCE
Air cleaner filter element
The air cleaner filter element should be serviced at regular
intervals. Service the element more often when riding in un-
usually wet or dusty areas.
1. Open seat (see page 12).
2 2 2 2 2
2. Remove air cleaner cover screws 1.
3. Remove the air cleaner case cover 2.
4. Remove the air cleaner element
5. If lightly soiled, clean the filter 3 with compressed air. If very
dirty (or if the filter is at the replacement interval per the main-
tenance schedule) discard the air cleaner element.
6. Install the cleaned or new air cleaner element. Use the
KYMCO genuine air cleaner element or an equivalent air
cleaner element specified for your scooter.
1 1 1 1 1
7. Complete the installation by reinstalling the air cleaner parts in
the reverse order of removal.
Improper installation for the filter can cause water or
dirt to enter the engine causing premature wear.
Using the wrong KYMCO air cleaner element or a non-
KYMCO air cleaner element which is not of equivalent
quality may cause premature engine wear or perfor-
mance problems.
3 3 3 3 3
37