Selecting Enet As The Communication Port - Xantrex 850W Operating Manual

Selecting ENET as the Communication Port

Once the XTR unit with the ENET option has the option card configured,
you'll need to configure the XTR to use the ENET option card as the
active communication port.
To select ENET as the communication port:
1. Turn the 9-Position Mode Control Knob to PGM.
2. Turn the Rotary knob/Enter button to select the LAn communication
3. Press the Rotary knob/Enter button.
4. Turn the Rotary knob/Enter button to select the desired address
5. Press the Rotary knob/Enter button to commit the new address.
M370046-06
rE is displayed in the output voltage display.
port.
ADDR is displayed on the output voltage display.
between 1 to 30.
Configuring the Device Using DeviceInstaller
2-17