2. Click Search to get a list of the all the XTR devices that can be
Figure 2-15 Searching for Power Supply IP Address
3. If the IP address shown and the method that the XTR unit is using to
4. Click on the Assign IP icon and the Assign IP Address window
M370046-06
reached from the network adaptor that you previously selected. If
your XTR unit (s) are powered up, they should appear in this list.
After a short delay, your power supply will be found. See
Figure 2-15. If the power supply is not found or the found device is
not reachable, contact your network administrator for details about
network settings.
obtain this address is correct, go to step 13. Otherwise, continue with
step 4.
appears. See Figure 2-16.
Configuring the Device Using DeviceInstaller
2-13