Figure 2-25 Main Terminal Window - Xantrex 850W Operating Manual

Ethernet (ENET)
5. In the Connect using: box, select "TCP/IP (Winsock)".
6. In the Host address box, enter the IP address, obtained in step 14 of
7. In the Port number box, enter "10001" as the value.
8. Click OK.
To specify the terminal connection properties:
1. Click Disconnect if necessary, and click Properties in the main

Figure 2-25 Main Terminal Window

2. In the ENET Properties window, click on the Settings tab. See
2-20
the section entitled "Assigning an IP Address to the Power Supply
Unit" on page 2–12.
HyperTerminal window. See Figure 2-25.
Figure 2-26.
M370046-06