Advanced Section; Network Topology 1: Simple Lan; Figure 2-32 Multiple Power Supplies And Two Computers - Xantrex 850W Operating Manual

Advanced Section

The advanced section describes the setup and connection for various
network topologies involving multiple power supplies.

Network Topology 1: Simple LAN

The simple LAN topology is the most common configuration for setting
up the ENET option on the XTR. The topology follows the typical star
topology provided by a HUB and multiple XTRs with the ENET option
and one or more computers. Figure 2-32 shows this configuration.
Local Computer #1
ENET
Power Supply #1

Figure 2-32 Multiple Power Supplies and Two Computers

All devices connects via the HUB. Every device must have a unique IP
address, for example:
•
•
•
•
•
•
You must set up every device manually.
M370046-06
HUB
ENET
Power Supply #2
Computer #1: 169.254.117.231
Computer #2: 169.254.117.232
Power supply #1: 169.254.117.220
Power supply #2: 169.254.117.221
Power supply #3: 169.254.117.222
Power supply #30: 169.254.117.230.
Advanced Section
Local Computer #2
ENET
Power Supply #30
2-25