Table 1: Front Panel Vs-5X5 5X5 Video Audio Matrix Switcher Features - Kramer VS-5x5 User Manual

Table 1: Front Panel VS-5x5 5x5 Video Audio Matrix Switcher Features

# Feature
1 IR Receiver
2 Power Switch
3 OUT Buttons
4 IN Buttons
5 ALL Button
6 OFF Button
7 7-segment Display
8 VIDEO Button
9 AFV Button
10 AUDIO Button
11 STO (STORE) Button Pressing STO followed by an output button stores the current setting
12 RCL (RECALL)
Button
13 TAKE Button
14 LOCK Button
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 When the Audio button illuminates, that is, when the audio breakaway mode is selected
3 When the Video button illuminates, that is, when the video breakaway mode is selected
4 Also displays the number of IN and OUT ports, the firmware version number, and the MACHINE #. Refer to section 7.1
5 The VIDEO button is illuminated when the video breakaway mode is selected
6 The AFV button is illuminated when the AFV mode is selected
7 The AUDIO button is illuminated when the audio breakaway mode is selected
8 For example, press STO and then the Output button # 3 to store in Setup # 3
9 Only view, nothing is implemented at this stage
10 When in Confirm mode, the TAKE button illuminates
4
Your VS-5x5 5x5 Video Audio Matrix Switcher
The red LED is illuminated when receiving signals from the Infra-red remote
control transmitter
Illuminated switch for turning the unit ON or OFF
Select the output to which the input is switched
Select the input to switch to the output
Pressing ALL followed by an INPUT button, connects that input to all outputs
An OFF-OUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
Displays the selected audio
4
above each input)
5
When pressed actions relate to video
6
When pressed actions relate to video and audio channels. Audio channels
follow the video channels
7
When pressed actions relate to audio
Pressing the RCL button and the corresponding OUTPUT key recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different OUTPUT button lets you view
choice, pressing the RCL button again implements the new status
Pressing TAKE toggles the mode between the CONFIRM mode
AT ONCE mode (user confirmation per action is unnecessary)
Disengages the front panel switches
Function
2 3
or video input switched to the output (marked
9
another setup. After making your
KRAMER: SIMPLE CREATIVE TECHNOLOGY
1
8
10
and the