Table 1: Front Panel Vs-808Yc 8X8 S-Video / Audio Matrix Switcher Features - Kramer VS-808YC User Manual

Your VS-808YC 8x8 s-Video / Audio Matrix Switcher

Table 1: Front Panel VS-808YC 8x8 s-Video / Audio Matrix Switcher Features

# Feature
1 IR Receiver
2 Power Switch
3 OFF Button
4 ALL Button
5 OUTPUT Buttons Select the output to which the input is switched
6 INPUT Buttons
7 TAKE Button
8 VIDEO Button
9 AUDIO Button
10 AFV Button
11 STATUS 7-segment
Display
12 STO (STORE) Button Pressing STO followed by an output button stores the current setting
13 RCL (RECALL)
Button
14 LOCK Button
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 When in Confirm mode, the TAKE button illuminates
3 The VIDEO button is illuminated when the video breakaway mode is selected
4 The AUDIO button is illuminated when the audio breakaway mode is selected
5 The AFV button is illuminated when the AFV mode is selected
6 Also displays the firmware version number and the MACHINE #. Refer to section 8.1
7 For example, press STO and then the Output button # 3 to store in Setup # 3
8 Only view, nothing is implemented at this stage
The LED is illuminated when receiving signals from the Infrared remote
control transmitter
Illuminated switch for turning the unit ON or OFF
An OFF-OUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
Pressing ALL followed by an INPUT button, connects that input to all outputs
Select the input to switch to the output
Pressing TAKE toggles the mode between the CONFIRM mode
AT ONCE mode (user confirmation per action is unnecessary). When in
TAKE mode, pressing TAKE implements the action
3
When pressed actions relate to video, and display shows video status
4
When pressed actions relate to audio, and display shows audio status
5
When pressed actions relate to video and audio channels. Audio channels
follow the video channels
Displays the selected input switched to the output (marked above each
6
input)
Pressing the RCL button and the corresponding OUTPUT key recalls a
setup from the non-volatile memory. The stored status blinks. Pressing a
different OUTPUT button lets you view
choice, pressing the RCL button again implements the new status
Engages/disengages the front panel switches. Button is illuminated when
front panel is locked
Function
8
another setup. After making your
1
2
and the
7
5