Operating The Vp-727; Operating Via The Osd Menu Screen; Preview And Program Setting Commands; Figure 10: Menu Screen Icons - Kramer VP-727 User Manual

9

Operating the VP-727

You can operate the VP-727 via the:
OSD Menu, see section 9.1
LCD Display, see section 9.2
Infra-red Remote Control Transmitter, see section 9.3
ETHERNET, see section 9.4
CONTROL Panel, see section 9.5
RS-232, see section 9.6

9.1 Operating via the OSD MENU Screen

The OSD superimposes a menu on the Preview screen from which you can
control your VP-727. When the OSD front panel button is on, pressing the
MENU button on the front panel or the Menu key on the infra-red remote
control transmitter displays the first OSD screen
If the OSD is off, pressing the MENU button on the front panel or the Menu
key on the infra-red remote control transmitter will not display the " Menu
screen" . In this case, you can navigate via the front panel LCD. Figure 10
defines the five interactive icons each representing a Level 1 function:
Preview
Setting
9.1.1

Preview and Program Setting Commands

Figure 11 and Table 8 define the Preview and Program Setting commands:

Figure 11: Preview and Program Setting OSD Menus

1 Or the last used OSD screen
26
Operating the VP-727
Program Transition
Setting

Figure 10: Menu Screen Icons

1
, the " Preview Setting" screen.
Utility
Information
KRAMER: SIMPLE CREATIVE TECHNOLOGY