Utility Commands; Tcp/Ip Setting Commands; Figure 15: Utility Osd; Figure 16: Tcp/Ip Setting Osd - Kramer VP-727 User Manual

9.1.3

Utility Commands

Figure 15 and Table 11 define the Utility screen:

Figure 15: Utility OSD

9.1.3.1
Figure 16 and Table 12 define the TCP/IP Setting screen:

Figure 16: TCP/IP Setting OSD

1 For configuring the parameters of the OSD (on-screen display) window
2 Setting the Time Out to OFF will display the OSD continuously, until you manually close it
3 Dynamic Host Configuration Protocol
Operating the VP-727

TCP/IP Setting Commands

Table 11: Utility OSD Setting

Level 1 Level 2
TCP/IP Setting DHCP
(see section
IP Address
9.1.3.1)
Subnet Mask
Gateway
Apply
1
OSD Setting Size
H-Position
V-Position
Time Out
Misc. Setting Logo
(see section
Save Lock
9.1.3.2)
Input Lock
Background
Blank Color
Save (see Setting 1 to 8 Saves the setting
section
Recall Setting 1 to 8 Recalls the setting
9.1.3.3) Setting 1 to 8 Erases one setting or
Erase
Factory Reset Cancel/OK

Table 12: TCP/IP Setting OSD

Feature Function
3
DHCP Allows the network administrator to
distribute IP addresses from a central point
and automatically send a new IP address
when an Ethernet point is plugged into a
different network location
IP Address A 32-binary digit number that identifies
each sender or receiver (within a network
via a particular server or workstation) of data
(HTML pages or e-mails) that is sent in
packets across the Internet
Subnet Allows the packet that arrives at the
Mask gateway with its unique network number
to be routed within the organization's
internal gateways
Gateway A network position serving as an entry to
another network. On the Internet, a node or
stopping point can be either a gateway
node or a host (end-point) node
Level 3 / Range
On/Off
Normal, Double
–32 to 32 0
–32 to 32 0
2
3 to 60 or OFF 20
On/Off
On/Off
On/Off
Black/Blue
Black/Blue
all the settings
31