Live View Display Mode Selection; D I S P L A Y M O D - Ganz DIGIMASTER SERIES User Manual

3. Display

2. Live View Display Mode Selection

3. Display Mode
• User can select from a variety of multi-screen Display Modes (1ch, 4ch, 6ch, 8ch, 9ch, 13ch, 16ch)
• The initial Display Mode is set to either 8ch (DR8N) or 16ch (DR16N) mode.
When this unit is connected with a remote client PC, a
Network Status Icon will appear on the Status Bar.
• This icon indicates the current network conditions.
- Green: Network is connected and stable.
- Blue: Network is connected, but is unstable.
- Red: Network is very unstable.
• Select One Channel using the Channel Selection Buttons (1 ~ 8/16).
• Use the Display button to change the multi-channel Display Mode.
• Press Channel Selection Button twice to view the channel on Full Screen.
13