Rear Panel(8&16Ch) - Ganz DIGIMASTER SERIES User Manual

2. Product Description
2. Rear Panel(8&16CH)
4
① Video IN / Loop : BNC Video Input Port (1 ~ 8/16), BNC Video Loop Output (1 ~ 8/16)
② Monitor out : BNC Main Monitor Output
SVHS : Output Video by Connected SVHS.
③ Spot #1 ~ #4 : 4/2(8CH) x BNC Output to Individually-Sequenced Spot Monitors
④ Audio In : 4 x RCA Audio Line Input Terminal
⑤ Audio Out : RCA Audio Line Out Terminal
⑥ Alarm : 8/16 x Input TTL Alarm/Sensor Input Terminal
⑦ Relay : 8/16 x Relay Output Terminal
⑧ USB PORT: USB Port for use of a USB Memory Stick and/or USB HDD Backup
⑨ VGA OUT : VGA Main Monitor Output (to a Computer Monitor)
⑩ RS-232C : Serial Configuration Port for Program Debugging
⑪ RS-485 : Serial Interface for PTZ device connection and control
⑫ RJ-45 jack : 10/100 Ethernet LAN/WAN connection (for Remote Access and Configuration)
⑬ AC Power Input
• When System Installation, Please Install under System Power Off Status.
Tip
• Please Use Specific Adaptor when Power Supply.
1
5
6
2
7
8 9 10
8
3
11
12 13