System - Ganz DIGIMASTER SERIES User Manual

5. Menu

4. System

- Basic System Environment Setup
4-1. Date/Time
※ You should set the proper Time Zone for your geographic location before adjusting the other settings.
• Date / Time: Set the Present Date and Time
• Date Format : Select the style of Date Display. (Ex: YYYY/MM/DD or MM/DD/YYYY)
• Time Format : Setup Time Display as either 12 Hour or 24 Hour Base.
• Network Time Server: Setup an NTP Time Server, to synchronize Date/Time with other devices on the Network.
• D.S.T: Daylight Savings Time Function (On/Off)
• Time Zone Setup : Choose the Time Zone (relative to GMT standard).
Tip
※ How to perform Date/Time Setup via Network (NTP) Time Server:
1. Set the Time Zone for your geographic location.
2. Setup the Network Time server information and press the "Sync" button.
3. If correct time is not retrieved automatically, set the Date/Time manually.
4. If the correct Date/Time is not set, you may experience problems when using Date/Time Search.
• If the desired Date/Time setting is set to an earlier Date/Time
than present, the system will prompt the user to delete the past
Recording Data from the HDD.
(All data recorded before the desired Date/Time will be preserved.)
[ OK -> Delete Past Data and Change the Date/Time. ]
[ CANCEL -> No Changes to Date/Time setting. ]
25