Ganz DIGIMASTER SERIES User Manual page 21

5. Menu
* Setup sequence
① Press enter then red border line
disappear. Setup mode activated.
④ Setup next mode as before.
Total 16 mode can be selected.
1-4. SPOT OUT
② Select display mode among 16
mode. 1set can be made by 16 mode.
⑤ When finish setup, press return.
(Save & Exit / Exit / Cancel)
• Channel : Select spot out channel(1~4).
• Select channel from the list by V check. (#1~#16)
• User can see the selected channel on spot out channel.
20
③ Display mode selected, press
channel selection button as you
want. Input all channel NO.
⑥ By SEQ button of front panel,
can see setup mode.