Ganz DIGIMASTER SERIES User Manual page 30

5. Menu
4-5. System Information
• System data
- User can save/load settings.
- Press 'SAVE' to save current setup without message.
- Press 'LOAD' to load saved setup from USB device without message.
• S/W Version: DVR Firmware Version
• H/W Version : DVR Hardware Version
• Video Signal Type: NTSC or PAL
• Disk Capacity: used HDD capacity / total HDD capacity
• IP Address: The current IP Address of the DVR
• MAC Address: Fixed Hardware (MAC) Address of the DVR
• System name : Input system name by virtual keyboard.
• F/W update
- User can do F/W update by USB device.
- Press 'PRESS'
- Select F/W from the list.
- Press 'START'
• Factory default
- Click the button marked "Press" to Set DVR to the original
Factory Default Settings.
-The system will show a Warning Message. Press OK to
continue, or CANCEL to keep the current settings.
- If you set DVR to Factory Default, all settings are initialized,
but Recorded Video Data will not be erased.
29