User Controls, Indications & Connections - Danish Interpretation Systems DCS 600 User Manual

Danish Interpretation Systems
User controls, indications & connections
Front plate layout
The front plate layout of the AO 6008 Audio Output Unit consists of a large illuminated LCD display and 8
buttons for setting up/controlling the unit:
Front plate controls
The AO 6008 Audio Output Unit features the
following controls and displays.
LCD Display
The display is a multi line, dot matrix, back lit,
LCD display. It is possible to view the language
settings for all 8 channels simultaneously. By
navigating a menu structure the user can access the
settings for a particular channel.
Buttons
Eight push buttons are placed on the front of the
AO 6008 for changing the languages and volume
settings for the output channels as well as for
navigating the menu structure. The buttons have the
following general functionality:
Four select buttons
Four buttons placed on the left-hand side of the
display. Each button is associated with a line
pointing towards a text line in the display. This
indicates, that pushing the button 'selects' the
functionality.
8
A: 12ALB
B: 14ENG
C: 15NOR
D: 0FLO
Menu
Manual 01 18 04440
E: 13DAN
F: 1FIN
G: 2SWE
H: 3POL
Enter
Enter button
The Enter button is used, when a selection is made
in the Menu. Pressing the Enter button concludes
the selection made, and at the same time it indicates
a confirmation of the possible changes made within
the selection. The Menu system returns to the
previous menu. Notice, that some changes are
applied immediately, and confirmation is thus not
required.
Menu button
The Menu button is also used, when a selection is
made in the Main Menu. The Menu button
concludes the selection, but in contrast to the Enter
button, the Menu button does not confirm a possible
change made within the selection. Instead, the
Menu system returns to the previous menu without
confirming changes, if confirmation is required.
Up (▲) and Down (▼) buttons
In the normal operation display these buttons are
used to select the headphone monitoring channel. In
the set-up menu the Up and Down buttons are used
to leaf through menu items, or to increase/decrease
values within a selection
User Manual