Setting Up The Dvr Unit; Installing The Hard Disk - Avermedia AVerDiGi EB1304NET SATA+ User Manual

1.5

Setting Up the DVR Unit

1.5.1 Installing the Hard Disk

The DVR unit allows user to install one SATA hard disk.
For hard disk spec, please referring to
i
Products → Embedded Analog DVR → AVerDiGi EB1304NET SATA series →
Hardware Recommendations
The "compatible hard disks" indicated in the above recommendation list only means
that these commercially available hard disks were tested with AVerMedia products and
functioned well under normal operation conditions. AVerMedia does not guarantee or
provide warranties, explicitly, implied or statutory with respect to the reliability of the
hard disk function or its compatibility. In no event AVerMedia shall be liable for
damages, with respect to any business interruption of clients, lost profits, loss of
programs or other data on your information handling system or otherwise. This includes
direct, indirect, incidental, special, or consequential damages, resulting from the
incompatibility caused by the usage of these hard disks, even if AVerMedia has
expressly advised about the risk of such damages. The entire risk arising out of the use
of any information attached here with is borne by the recipient.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
3. Secure the brackets on the hard disk
http://www.avermedia.com/AVerDiGi/
2. Push the cover backward and lift
4. Connect the the SATA cable and the power
connector to the hard disk
6
→