Avermedia AVerDiGi EB1304NET SATA+ User Manual page 53

motion.
i The Motion Detection must be enabled first, the alarm sending mail will send out
the mail when detect motion.
- Sensor Alarm: Issue an alarm when sensor of selected channel has triggered.
- Video Loss: Issue an alarm when t selected channel's video is lost.
- E-Mail Setup
SMTP: Enter the SMTP server
User ID & Password: Enter User ID and Password for e-mail server user
identification
From: Enter the sender e-mail address
To: The recipient e-mail address and separate it with a semicolon
Subject: Enter the message title
Message: Type the message
- Mail with picture: When send out alarm mail will include a capture image of alarm
channel.
(3) CMS Alarm Setup
Enable/disable alarm mail sending to CMS (Central Management System) when alarm
has triggered at the selected condition.
- HD Fail Alarm: Issue an alarm when hard disk of DVR system is failed.
- Motion Alarm: Issue an alarm when the selected channel has been detected the
motion.
i
The Motion Detection must be enabled first, the alarm sending mail will send out
the mail when detect motion.
- Sensor Alarm: Issue an alarm when sensor of selected channel has triggered.
- Video Loss: Issue an alarm when t selected channel's video is lost.
48