Table of Contents
Advertisement
FIRST TIME INSTALLATION
Finishing the first time installation
The channels found at the search procedure will now be saved.
A message telling that the installation procedure is complete will
be shown on the screen.
Press OK in order to start watching channels from the box.
If the smartcard is not inserted you will be informed to do so.
If the automatic search procedure failed
Normally the channel search procedure will work without any
problems. If the Setup Identifier code is wrong or you have
moved the box to another living area; after two unsuccessful en-
tries of the code you will get the menu shown to the right.
From this menu you can manually enter the values necessary for
the search procedure. The values you have to enter you can get
from your service provider.
Use the number buttons on the remote control to enter the dif-
ferent values. If you enter a wrong digit use the
use the
to move from one line to another.
The "." will be automatically set.
Frequency with 4 digits.
Network Number with 3 digits.
Symbol Rate with 5 digits.
Modulation: Select Modulation with the
Home Application Identifier
Service Provider Identifier
When you have entered the values, press OK to start the chan-
nel search.
to erase it. You
buttons.
GB 15
Advertisement
Table of Contents
