If you have a TV set with a 4:3 picture format, and the transmis-
sion is in 16:9, you can select Fullscreen or Letterbox to change
Fullscreen will fill up the screen vertically, but cut off some infor-
mation from the left and right sides of the picture.
Letterbox will give a complete picture, but leave black areas at
the top and bottom.
TV Release (0)
With the 0 button you can toggle between analogue terrestrial
TV, video, analogue and digital satellite TV signals.
(This is only valid if the units are connected via SCART cables; not
by a RF connection.)
Please note, that during the recording of a digital channel, eve-
rything shown on the screen will be registered! For example, if
you call up a menu from the Mediamaster on the screen, the
menu will be recorded!
The TEXT Button (Teletext)
Pressing the TEXT button will open a Teletext page (if Teletext
is transmitted.) Select teletext pages with the numeric buttons
on the remote control.
You can also quickly step to the different page alternatives shown
in any page by pressing
go to that page.
The "0" button will show the index page (normally page 100.)
will show the next or previous teletext page.
You can use the double arrow buttons to browse through the
pages you just have visited.
Press EXIT, BACK or TEXT to return to TV/Radio mode.
On most new TV sets you can use the TV's remote control to
open and control the teletext functions while watching digital TV
channels. (The function is called VBI insertion.) NOTE: Also see
the "Subtitles"settings on pages 28 and 29.
This button has double functions.
While watching TV: The TV/
TV to Radio mode and vice versa.
When you have entered a menu, the EXIT function is used to
leave the menu at any time without changing anything.
. Press OK on a selected number to
function is used to switch from