From here you can adjust settings for your TV.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
If the teletext function does not work when watching channels
from an analogue satellite receiver connected to the Media-
master, change this setting from RGB to PAL.
Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it
to the same value on the TV. If you do not, the picture will be-
RF Modulator Type
If the Mediamaster is connected to the TV with a RF cable, you
must select the right RF modulator alternative, which is depend-
ent on the country where the Mediamaster is being used.
Select "Normal" for all countries outside the UK.
Select "UK (PAL I)" if the box is used within the UK.
If you get picture but no sound, the RF modulator selection might
Position of the RGB output
Adjust the horizontal position of the TV picture with the
buttons. (The "TV signal," see above, must be set to RGB for this
function to work.)
The time is adjusted by using the
You can also adjust the minutes by using the
buttons, 1/2 an hour at
The RF channel number will be in-
dicated on the front display of the