Blade .Installation - Casablanca C31uxxB Owner's Manual

Blade Hardware (not to scale)
Blades (5)
Step 9a. Remove the five shipping blocks, and
screws as shown in Figure #2. DO NOT discard the
ten (10) screws; you will need them for installing the
blades onto the fan.
attach Blade irons
Step 9B. Attach a blade to a blade iron by first
pressing the blade iron onto the blade, then attaching
the blade iron using three blade screws and blade
washers as shown in Figure #3. Using the provided
screwdriver, tighten securely by hand only. Repeat
for each blade assembly.
Blade installation
Step 9c. Before attempting to attach the blades,
review Figure #4 for blade placement on the motor.
The numbers and lines show screw placement when
attaching the five blade irons and blades assemblies
to the fan.
Blade InStallatIon
Blade iron
Blade irons (5)
Screws
BLade and
BLade hoLdeR
H
olliston
Blade Screws (16)
Washers (16)
ShiPPinG
BLoCkS
ShiPPinG BLoCkS
SCReWS
BLade iRon
SCReWS
BLade
BLade iRon
DC
™
Phillips
Screwdriver
Figure #2
BLade WaSheR
Figure #3
Figure #4
13